• SPDT contact system
• Electrical rating AC-3 16/6A, 400 V,
AC-15 10/4 A, 400 V
• Screw terminals
• Contact material in both silver and gold
• Adjustable differential setting
• Enclosure IP30, IP44
• Marine and UL approval
• KP temperature switch series
Pressure controller KP1, KP2, KP5, automatic, manual reset, pressure interface is1/4 bell mouth, single package.KP35, KP36 are automatically reset, the pressure interface for the G1 / 4 pipe thread, a single package.
KP35, KP36 specific Applications:
KP / KPI series pressure controller for industrial pressure regulation, monitoring and alarm
Features: Wide range of adjustment
Can be used for pump, boiler and air compressor control.
Small size, easy to install.
Anti-vibration impact.
Ultra-short chatter time, contact wear reduced to a minimum, greatly increasing the reliability.
Front-end wiring, easy to control cabinet installation, save time.
AC and DC
For 6-14mm cable.
Threaded cable entry for pg13.5 and pg16 cables.
KP35, KP36, KP5, KP1, KP2 Product Detailed Parameters:
1, KP35, Product Code: 060-1133,060-5047: Adjustment Range -0.2-7.5 (bar) Mechanical Backlash 0.7-4 (bar) Maximum Working Pressure 17 (bar) Maximum Test Pressure 22 (bar) G1 / 4A Contact Material: Ag, common code: 060-1133
2, KP36, Product code: 060-1108,060-1137,060-1221,060-1144: Adjustment range 2-14 (bar) Mechanical backlash 0.7-4 (bar) Maximum working pressure 17 (bar) Maximum test pressure 22 (bar0 pressure connection: G1 / 4A contact material: Ag, common code: 060-1108
3, KP5: Adjustment range 8-32 (bar) Mechanical backlash 1.8-6 (bar) Maximum working pressure 42 (bar) Maximum test pressure 47 (bar) Pressure connection: 1/4 Bell, contact Material: Ag, Commonly used code 060-1171
4, KP2: Adjustment range -0.2 to 5 bar Mechanical backlash 0.4-1.5 bar Maximum working pressure 17 bar Maximum test pressure 20 bar Pressure connection: 1/4 Bell, contact Material: Ag , Commonly used code 060-1120
5, KP1: Adjustment range -0.2 ~ 7.5 (bar) Mechanical backlash 0.7-4 (bar) Maximum working pressure 17 (bar) Maximum test pressure 20 (bar) Pressure connection: 1/4 Bell, contact material: Ag , Commonly us
Important tips:
In addition, since we need to install the software control program in the controller, you can install it directly on the machine after you get it
1; This product does not support remote control and can only be operated on a separate machine. (Original product supports remote control)
2; Please be sure to contact us before ordering and send us the front and back pictures of the controller and the machine nameplate, we will install the program software according to the pressure value.
3; If your machine contains an inverter, provide the nameplate of your inverter,
4; If there is no machine nameplate, we refuse to ship,
For example, the picture shows:
There are many kinds of accessories, please message if you need.
Shipping：
1.All economic and standard shipping is free.
2.Value over 159 USD, we will provide expedited shipping for free.
Orders below 159 USD can be delivered via EMS (5-8 working days) or DHL (2-5 working days), approximately 19 USD or higher. Please contact us if needed. 3.We appreciate your comprehension that there might be delay during the national holidays and traditional festivals.
Contact us：
1.Please contact us for any question or problem that you may have(We reply your message within 24 hours)
2.Your satisfaction is our goal and motivation. Please don’t post any Neutral or Negative Feedback without contact. It will hurt us a lot.
3. Please understand that our buyers are obliged to pay customs duties. The sales price does not include customs duties. However, we will declare a lower value during transportation to prevent you from paying excessive tariffs.
Danfoss Pressure Switch Pressure Controller KP1 KP2 KP5 KP15 KP35 KP35 060
Danfoss Pressure Switch Pressure Controller KP1 KP2 KP5 KP15 KP35 KP35 060
Danfoss Pressure Switch Pressure Controller KP1 KP2 KP5 KP15 KP35 KP35 060
